TIMBEREX® NATURAL
- Made from natural, fast drying oils
- Cured and buffed surface has a lustrous sheen with an easily cleaned silk finish
- Colour is enriched and grain patterns are highlighted on the smooth, easily maintained surface
tip from an expert
slower drying process
tips
conclusion
TIMBEREX® HEAVY DUTY UV PLUS
- Seals and protects wood from within
- For high traffic areas as airports, museums, conference centres and more
- UV-blockers prevent discoloration
- Protects the wood against liquids and stains
- Protects without losing the ‘natural wood look’
TIMBEREX® COLOURED
- Cured and buffed surface has a highly wear and water-resistant finish
- Colours can be mixed together for a wide range of effects
- Made from natural, fast drying oils and resins
TIMBEREX® BIO-C
- Neutral (pH7)
- Non-foaming
- Low viscosity, disperses easily in cold water
- Biodegradable and non-hazardous
- Does not contain perfumes or colouring agents
- Solvent-free
- Very low odour
- Does not leave smears
TIMBEREX TIMBERGUARD™ TEAK
- For all wood species
- Contains UV-filters to protect wood from ageing
- Deep-penetrating, hardening natural oil
- Easy to apply by roller, brush or cloth
TIMBEREX TIMBERGUARD™
- For all wood species
- Contains UV-filters to protect wood from ageing
- Deep-penetrating, hardening natural oil
- Easy to apply by roller, brush or cloth
ZINSSER® ALLCOAT EXTERIOR MATT
- Excellent colour retention
- Weather resistant
- Can be applied to different types of surfaces
- Flexible coating
- Recoatable in 1 hour
ZINSSER® WATERTITE
- Stops up to 2,5 bar water pressure (twice the strength of latex waterproofers)
- Prevents water-seepage through cement, masonry and concrete block walls and basement floor
- Protection of the dried coat against fungal degradation
- Can be applied to wet or dry surfaces
- Smooth, non-yellowing eggshell finish
- Interior or exterior application
- Prevents recurring efflorescence
- Fast drying
- Great for alkaline surfaces up to 12.5 pH
ZINSSER® PERMAWHITE SATIN
- Protection of the dried coat against fungal degradation
- Self-priming
- Good adhesion on glossy and hard-to-paint surfaces
- Easy application properties
- Durable, washable, moisture resistant finish
- Low odor
- Fast drying
- Excellent hiding power
- Resists dirt pickup
ZINSSER® BULLS EYE 1-2-3 PLUS
- Primer for every project – inside and outside
- Adheres to most surfaces
- Fixates chalky substrates
- Seals porous substrates
- Seals stains, even water and smoke stains
- Dry in 30 min., recoatable after 1 hour
- 12,5 pH Alkali resistant
- Ultra low VOC
- White, tintable in pastel colors (max. 1% universal colorants)
