SATIN PU-A
- Resistant to oils from the skin
- Good retention of colour and gloss
- Perfect flow
- Scratch-resistant
- Virtually odourless and quick drying
- Easy to work with a brush
tip from an expert
slower drying process
tips
conclusion
QUICK-PRIMER
- Quick drying
- can be painted over soon after application
- Good hiding power and filling performance.
- Good edge coverage
- Moisture regulating
- Even flow
- Easy to sand
PRIMER BP
- High filling
- Good flow
- Good edge coverage
- Matte appearance
- Very fine sandable
Red oxide primer
- Prevents metal rusting
- Good adhesion and quick drying
- For interior and exterior use
ACRYL-PRIMER
- Suitable for wood types that bleed
- Excellent flow properties
- Excellent adhesion
- Quick drying
- Virtually odourless and low solvent content
- Easy to sand
MULTI-PRIMER
- For wood
- plastic
- MDF
- non-ferrous metals
- etc.
- Excellent flow properties
- Excellent adhesion
- Quick drying
- Virtually odourless and low solvent content
- Easy to sand
FASSICRYL SATIN
- Skin grease-resistant
- Scratch-resistance and easy to clean
- Excellent flow viscosity
- Good colour and gloss retention
- Easy to apply with a brush and a roller
- Low-odour
SUPERGRIP® TREADSAFE
- Applicable until 0 °C
- Tough, long lasting finish
- One coat application
- External and internal use
COMBICOLOR® AQUA PRIMER
- Recoatable after 3 hours
- For new / slightly rusted surfaces
- Grey for light coloured topcoats
- Red for dark coloured topcoats
COMBICOLOR® ORIGINAL
- Primer and topcoat in one
- For application onto rust, bare metal
- High coverage: 10.3 m² per litre
- Sag resistant, no brush strokes
- Usable down to 5°C
