tip from an expert

slower drying process

tips

conclusion

HARD HAT® LINING AEROSOLS

  • For use with RUST-OLEUM® line applicators
  • Adjustable line width from 5 to 10 cm
  • Light traffic possible after just 4 hours
  • Adheres to asphalt, concrete, grass, metal, wood, etc.
  • Also available in 500 ml

PREVOSIL GB

  • Meticulous work possible without taping
  • Penetrates deep into the pores of the surface
  • Usable on fresh dry pointing
  • Reduces efflorescence of salts and lime
  • Ideal for masonry, concrete, sand-lime brick, mineral mortars, and slightly porous natural stone
  • Can be painted over

HARD HAT® GALVA ZINC

  • Cathodic protection of bare and galvanised steel
  • 90% pure zinc in dry paint film
  • Resists 500 hours of salt spray testing (DIN 50021 SS)
  • To recoat within one hour, brush version after 4 hours
  • To recoat with HARD HAT® metallic sprays

HARD HAT® GALVA EXPRESSE

  • Protection and quick drying in one
  • Tack free after just 5 minutes, to handle after 10 minutes
  • Ideal for production and construction environments
  • Resists 400 hours of salt spray testing (DIN 50021 SS)

HARD HAT® TOPCOAT FLUORESCENT

  • Highly visible fluorescent coatings
  • Ideal for railings, signs, colour coding etc.
  • First apply matt white 2190 for best results
  • Finish with transparent topcoat for better gloss
  • To handle after 30 minutes (at 20°C)
  • Available in red, orange, yellow, green and blue

HARD HAT® ANTI-CORROSION PRIMER

  • Ready to recoat within 1 hours or after 48 hours, to handle after 30 min.
  • For new or slightly rusty surfaces
  • Penetrates deeply into the surface and does not give rust a chance
  • Grey for light coloured topcoats and red for dark coloured topcoats

HARD HAT® ADHESION PRIMER

  • Ready to recoat after just 30 minutes
  • Unique coverage: 5.5 m² per aerosol
  • To recoat with HARD HAT® topcoats
  • Wide angle spray pattern for a large and even coverage

EPOXYSHIELD® CONCRETE REPAIR MORTAR

  • Traffic allowed after 24 hours
  • Recoatable after 48 hours
  • 10 kg (1-component) – 0.4 m²
  • Sandable to a smooth finish

COMBIPRIMER® ADHESION PRIMER AEROSOL

  • Easy to apply
  • Transparent blue finish
  • Recoatable after just 30 minutes
  • Very high coverage: 4,4 m²/can

COMBIPRIMER® ADHESION PRIMER

  • Easy to apply
  • Transparent blue finish
  • Recoatable after just 30 minutes
  • Very high coverage: 50 m²/l

Not sure about this proposal?
Get Free personal advice

Find another product